Panasonic ET-D3LEW60, Operating Instruction

Page: 8 / 18

8-ENGLISH
Lens calibration
Perform lens calibration after attaching the lens.
The lens calibration procedure differs depending on the projector you are using and the
main version of the firmware.
z
PT-RQ32K / PT-RZ31K / PT-RS30K: Main version is 3.00 or later
Refer to "Case 1" (
x
page 8).
z
PT-RZ21K / PT-RS20K: Main version is 2.00 or later
Refer to "Case 1" (
x
page 8).
z
PT-RQ13K / PT-RZ12K / PT-RS11K / PT-DZ21K2 / PT-DS20K2 / PT-DW17K2 /
PT-DZ16K2 / PT-DZ13K / PT-DS12K / PT-DW11K / PT-DZ10K
Refer to "Case 2" (
x
page 10). (Only ET-D3LEW50 is supported)
■ Case 1
z
PT-RQ32K / PT-RZ31K / PT-RS30K (main version of the firmware is 3.00 or later)
z
PT-RZ21K / PT-RS20K (main version of the firmware is 2.00 or later)
1) Press the <MENU> button.
2)
Use the ▲ and ▼ buttons to
select [PROJECTOR SETUP],
and press the <ENTER>
button.
z
The [PROJECTOR SETUP] screen
appears.
3) Use the ▲ and ▼ buttons to
select [LENS], and press the
<ENTER> button.
z
The [LENS] screen appears.
1/2 PROJECTOR SETUP
PROJECTOR ID ALL
PROJECTION METHOD
LENS
OPERATION SETTING
NORMAL
LIGHT OUTPUT
100.0%
BRIGHTNESS CONTROL AUTO
STANDBY MODE NORMAL
NO SIGNAL SHUT-OFF DISABLE
NO SIGNAL LIGHTS-OUT DISABLE
INITIAL STARTUP LAST MEMORY
STARTUP INPUT SELECT
LAST USED
DATE AND TIME
SUB MENU
MENU SELECT
ENTER
4) Use the ▲ and ▼ buttons to
select [LENS CALIBRATION],
and press the <ENTER>
button.
z
The [LENS CALIBRATION] screen
appears.
z
When the ET-D3LEW50 is attached,
a confirmation screen appears when
the <ENTER> button is pressed. In
such cases, proceed to step 6.
SUB MENU
MENU SELECT
ENTER
LENS
LENS TYPE ET-D3LEW60
LENS INFORMATION SETTING
LENS MEMORY
LENS HOME POSITION
ACTIVE FOCUS OPTIMIZER
LENS CALIBRATION
Attaching the Lens / Detaching the Lens (continued)