E
NGLISH
-3
4. Insert a new “ ACF unit ” into the compartment until it catches the both
locking detents.
5. Attach the ACF cover and tighten the ACF cover fixing screws securely
with a Phillips-head screwdriver.
6. Once the “ ACF unit ” has been replaced, press and hold the [ENTER]
button for about three seconds on the [FILTER COUNTER RESET]
submenu which can be selected from the [PROJECTOR SETUP] menu.
7. Press
I
to select OK and press the ENTER button to reset the FILTER
REMAINING to "0".
Notice:
Use this product with the "ACF unit" installed. If you use the projector with-
out the unit, the power will be shut off in order to prevent a possible failure
due to the collected dust and dirt.
3. Hold the pushes of the locking detents inward with fingers to release the
lock, and pull out carefully the “ACF unit” from the body.
* When you replace the ACF unit, clean the compartment and/or the Air
exaust port if you need to.
ACF
unit
Locking detents
Pushes
Pushes