1
English
Cleaning with the brush
1
1
Fig. 1: Remove the outer foil and the
inner blade block from the shaver.
2
2
Fig. 2: Remove the inner blade block
from the outer foil.
Remove the inner blade block by holding it
firmly at its central shaft and pulling it
vertically upward out of the shaver. If you
cannot remove it with the method
mentioned above, please first tilt the shaft
slightly to one side and then pull it
vertically upward out of the shaver.
3
3
Fig. 3: Clean with the brush as
illustrated.
•
1
2
4
4
After cleaning, follow in reverse the steps
illustrated in figure 2 and figure 1 to install the
inner blade block and the outer foil.
Fig.
(a) Outer foil
(b) Inner blade
block
(c) Shaver
Do not apply
excessive pressure
when cleaning the
inner blade block.
ES6510_CH.indb 13
2010/01/05 20:09:12