2
2. Clean the epilation head [
B
,
E
] and the shaver head [
G
]
with the cleaning brush [
J
].
Wet cleaning
1. Lift the frame, gentle/beginner caps upward while holding
the frame release rib [
B
3
]/the cap release rib [
CD
7
] or
remove the frame by pushing the frame release button
[
G
].
2-4
2. Apply liquid hand
soap to the discs and
the blades.
3. Turn the switch on and
then wet the discs and
the blades to create
foam.
4. Wash the head with
water to wash out hair.
Do not use hot water.
If soap is not completely washed away, then a white
deposit can accumulate and prevent the discs and the
blades from moving smoothly.
5. Turn the switch off, wipe the appliance with a dry cloth
and dry it well.
•
•
Replacing the outer foil
We recommend replacing the outer foil [
G
]
every year
and
the inner blade
every two years
. Remove the outer foil of the
shaver head [
G
] only when replacing it.
1. While pushing the outer foil gently with the fingers, use a
fingernail to release the plastic panel (
b
) on the blade
from the hooks (
a
) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed in
until it is hooked in the frame.
ES-WD71_AUS.indb 8
2009/01/19 14:14:52
