Panasonic ES-ST37, Operating Instructions Manual

Page: 15 / 92

15
English
Problem Action
The shaving sensor
responds even though the
shaver is not in contact
with the skin.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 13.)
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Makes a loud sound.
Apply oil.
Confirm that the blades are
properly attached.
The shaver can be loud due to the
linear motor. This does not indicate
a problem.
The driving sound
changes while shaving.
While the shaving sensor lamp
glows, the shaving sensor is
operating. The sound changes
depending on the beard thickness.
The power will not switch
to OFF.
Press the power switch twice while
using in the shaving sensor mode.
Press the power switch three times
while using in shaving foam mode.
Problem Action
Foam cannot be made in
shaving foam mode.
Making foam may be difficult
depending on the type of facial
cleansers etc., so adjust the
amount of water or facial cleanser.
Foam made in shaving foam
mode contains shavings.
Before making foam, cleanly rinse
off any shavings.
(See page 12.)
The odor is getting
stronger.
This can be improved by cleaning
every time after shaving.
You do not get as close a
shave as before.
Apply oil.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
The shaving sensor does
not respond.
Depending on the beard thickness
or shavings inside the shaver
head, the shaving sensor may not
function (the driving sound may
not change). This is not abnormal.
The shaving sensor may not respond
depending on the type and quantity
of the shaving gel or the quantity of
the foam. This is not abnormal.
Apply oil. The shaving sensor may
not respond when there is not
enough oil on the blades.