10
7. Insert the rechargeable battery into chassis. Confirm the
direction of battery. Once battery is disassembled, the
battery is reset. Connect the battery with the charging
adaptor about 10 seconds first.
8. Place the wire as shown the figure.
NOTE:
Press fit the lead wire neatly to avoid any pinching.
9. Set the trimmer driving bar and the slit blade driving bar.
10. Place fit the housing O-ring.
NOTE:
Make sure if there is no foreign substance sticking
around and not to pinching.
11. Attach the switch button to the housing A and assemble
the front panel.
