Panasonic ES-LV9QX, Operating Instructions Manual

Page: 10 / 68

10
English
Preparation
Charging the shaver
•Turn the shaver off.
•Wipe off any water droplets on the main body rear terminals.
1
Insert the appliance plug into
the self-cleaning recharger�
2
Remove the protective cap
while pressing the side of the
cap and insert the shaver into
the self-cleaning recharger�
•Slowly insert the shaver into the
self‑cleaning recharger taking care
not to damage the system outer foil.
1
2
3
3
Plug the adaptor into a household outlet�
•Check that the charge status lamp ( ) is glowing.
•Charging is completed after approx. 1 hour.
4
Disconnect the adaptor after charging is completed�
While charging After charging is completed
glows.
The number of the battery
capacity lamp will increase as
charging progresses.
All the battery capacity lamp
and will glow and then turn
off after 5 seconds.
Notes
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp ( ) may not glow for a few
minutes. It will eventually glow if kept connected.
•Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the charge status
lamp ( ) will blink quickly and the battery may fail to charge
properly in extremely high or low temperatures.
•The shaver can be used for approximately 2 weeks with a full charge.
(Based on one 3‑minute dry‑shave usages per day in an ambient
temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the following
conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Usage frequency of the sonic vibration cleaning mode
•If there is noise from the radio or other sources while using or charging
the appliance, move to a different location to use the appliance.
ES-LV9QX_ME.indb 10 3/6/2018 4:12:52 PM