background image

16

 

Removing the outer foil section

Press the foil frame release buttons and lift the 
outer foil section upwards.

 

Attaching the outer foil section

After turning the foil frame mark (

) to the front, 

securely attach the outer foil section to the shaver 
until it clicks.

 

Replacing the system outer foil

1. Press the system outer foil release buttons 

and pull down the system outer foil.

2. Align the foil frame mark (

) and the 

system outer foil mark ( ) and securely 
attach together until it clicks.

 

The system outer foil cannot be reversely 
attached.

 

Always insert the system outer foil to the 
foil frame when attaching to the shaver.

 

Do not press the system outer foil 
release buttons with excessive force. 
Doing so may bend the system outer foil, 
preventing complete attachment to the 
foil frame.

 

Replacing the inner blades

1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.

 

Replacement parts

Replacement parts are available at your dealer or Service Center.

Replacement parts for 
ES‑LT8N

System outer foil and inner 
blades

WES9015

System outer foil

WES9089

Inner blades

WES9068

Special Detergent for Shaver Cleaning & Charging 
System

WES4L03

Cleaning the self-cleaning recharger

 

Do not wash the self‑cleaning recharger unit with water. 
Also, do not wipe with thinners, benzine, alcohol etc.  
Doing so may result in malfunction.

 

The cleaning liquid unit and filter can be washed with water.

 

Remove the AC adaptor from the self‑cleaning recharger.

 

We recommend cleaning the self‑cleaning recharger each time 
you change the cleaning liquid.

1. Be sure to remove the cleaning liquid unit 

from the self‑cleaning recharger.

 

Some cleaning liquid components and 
skin oil may separate and adhere to the 
cleaning liquid unit and cleaning liquid 
filter. This does not indicate a problem.  
Wash with water.

2. Pour water as illustrated while 

tilting the cleaning liquid unit 
and shaking it gently.

 

You can clean with the 
cleaning liquid filter removed.

 

After washing, be sure to 
attach the cleaning liquid filter.

ES-LT8N_AUS(EN).indd   16

2015/05/13   20:04:33

Summary of Contents for ES-LT8N

























Reviews: