15
English
►
Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the foil frame mark (
) and the
system outer foil mark ( ) and securely
attach together until it clicks.
•
The system outer foil cannot be reversely
attached.
•
Always insert the system outer foil to the
foil frame when attaching to the shaver.
•
Do not press the system outer foil
release buttons with excessive force.
Doing so may bend the system outer foil,
preventing complete attachment to the
foil frame.
►
Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
►
Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑LT5N/ES‑LT3N
System outer foil and inner
blades
WES9015
System outer foil
WES9089
Inner blades
WES9068
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorized by
Panasonic for repair.
Problem
Action
The power switch does
not turn ON.
Unlock the switch lock.
(See pages 9 and 10.)
Shavings fly out in all
directions.
This can be improved by cleaning
every time after shaving.
System outer foil gets hot.
Replace the system outer foil if it
is damaged or deformed.
(See this page.)
Operating time is short
even after charging.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
The odor is getting
stronger.
This can be improved by cleaning
every time after shaving.
The driving sound
changes while shaving.
While the shaving sensor lamp
glows, the shaving sensor is
operating. The sound changes
depending on the beard thickness.
ES-LT5N_3N_US.indb 15
2015/04/17 17:38:35
