Panasonic ES-LC20, Operating Instructions Manual

Page: 5 / 16

5
English
Clean
Cleaning the shaver
1. Disconnect the power cord from the
shaver.
2. Apply some hand soap and some water to
the outer foil.
3. Press the power switch for more than 2
seconds to activate the sonic vibration
cleaning mode.
The battery capacity lamp ( ) and the
charge status lamp ( ) blink alternately.
After about 20 seconds, it will be
automatically turned off, or you can turn
it off by pressing the power switch.
. Remove the outer foil section and press
the power switch for more than 2 seconds
to activate the sonic vibration cleaning
mode and clean it with running water.
5. Wipe off any drops of water with a dry
cloth.
6. Dry the outer foil section and the shaver
completely.
7. Attach the outer foil section to the shaver.
8. Lubricate the shaver.
•
•
3
4
6
The mark on the left means suitable for cleaning under
an open water tap.
Warning
Disconnect the power cord from the shaver before cleaning
it in water to prevent electric shock.
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the outer foils.
3. Switch the shaver on, and run it for approximately
five seconds.
. Switch off the shaver, and wipe off any excess oil
from the outer foils with a soft cloth.
2
Cleaning with the brush
Clean the inner blades using the short brush
by moving it in direction (A).
Clean the system outer foil, the shaver body
using the long brush.
Do not move the short brush in direction (B)
as it will damage the inner blades and affect
their sharpness.
Do not use the short brush to clean the outer
foils.
•
•
(A)
(B)