13
Engli
sh
‑ Usage frequency of the sonic vibration cleaning mode
•If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
How to use
Shaving beard
1
Slide the switch lock button
downwards�
2
Press the power switch and shave�
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver over
the face against the grain of the beard.
•The beard under the chin and
around the throat can be shaved
better by stretching the skin so the
beard will stand.
•To prevent damaging the system
outer foil, do not shave with only a
part of the system outer foil.
3
Press the power switch when finished.
While using
After use
The remaining battery
capacity are shown and
then turn off after
5 seconds.
•Approximate amount of
battery capacity is
displayed as 20 ‑ 100.
The remaining battery
capacity blink and then
turn off after 5 seconds.
When the battery capacity is low
“20” blinks when operating the shaver.
•You can shave 2 to 3 times after “20” blinks.
(This will differ depending on usage.)
Notes
•The appliance may not operate in an ambient
temperature lower than approximately 5 °C (41 °F).
•
To prevent erroneous operation, place your fingers on
the thumb rest while using the shaver.
•The sonic vibration cleaning mode is activated when
the power switch is pressed for more than 2 seconds
while the shaver is not operating. (See page 14.)
You cannot shave in this mode.
Summary of Contents for ES-LA63A
Page 2: ...2 ...
