1
English
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is
used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the outer foils.
. Raise the trimmer and apply a drop of oil.
. Switch the shaver on, and run it for approximately
five seconds.
. Switch off the shaver, and wipe off any excess oil
from the outer foils with a soft cloth.
7
. Remove the outer foil
section and press the 0/1
switch for more than 2
seconds to activate the
turbo mode for “sonic”
vibration cleaning and
clean it with running
water.
6. Wipe off any drops of
water with a dry cloth.
. Dry the outer foil section
and the shaver
completely.
. Attach the outer foil
section to the shaver.
. Lubricate the shaver.
The mark on the
left is for a
washable shaver
and indicates it
can be cleaned
with water.
Caution for turbo mode
Shaving in turbo mode may damage your skin. Turn
the shaver off and then on again to cancel turbo
mode.
Do not place your fingers on the 0/1 switch while
using the shaver. This may cause the shaver to turn
off or enter turbo mode.
•
•
ES-LA62_CH.indb 14
2009/05/22 21:07:46
