1. Remove the attachment and blade.
2. Peel off the dial cover.
NOTE: Dial cover is fixed with an adhesive tape. Make
sure not to scratch dial cover or dial by something
sharp-edged tool when taking out the dial cover.
3. Loosen two screws tightening the blade spring, a screw at
the dial and a screw on the bottom cover.
4. Remove housing C.
5. Take the front panel out slightly lifting up to the direction of
arrow.
6. Remove the rear panel.
NOTE: Make sure not to brake the hooks.
7. To remove the trimmer driving bar, press it outwards.
8. Loosen screws with O-ring.
3 DISASSEMBLY INSTRUCTIONS
Follow the procedure below to disassemble the main body.
3
ER220-E2 / ER221-E2
