12
English
Lubrication
•
Apply the oil to the clipper before and after each use.
Apply a drop of the oil to each
indicated point.
Attach the blade to the main
body, turn on the power and
allow to run for approximately
5 seconds.
Failure to apply the oil may
cause the following problems
due to rust, wear or burn out.
-
The clipper has become blunt.
-
Shorter operating time.
-
Louder sound.
Lubricating the design blade
ER-GP22
Lubricate the design blade as
illustrated.
►
Replacement parts
Replacement part is available at your dealer or Service Centre
Replacement parts for ER‑GP21/
ER‑GP22
Blade
WER9352
Design blade
WER‑9P10
Cleaning the AC adaptor
Use the cleaning brush to clean hair trimmings and dust in the
charging plug, the comb attachment shelves or in the hole on the
bottom surface.
Storing comb attachments
You can store your comb attachments in
the comb attachment shelves.
ER-GP21_EU.indb 12
2015/12/04 15:54:30