Panasonic ER-GK75, Operating Instructions Manual

Page: 16 / 36

16
English
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the
store where you purchased the unit or a service
centre authorized by Panasonic for repair.
Problem Action
The main body
has become
blunt.
Operating time
is short.
Main body
stopped
functioning.
Until problems are solved, please
follow each procedure as follows:
1. Charge the main body.
(See page 9.)
2. Clean the blade and apply oil.
(See pages 13‑15.)
3. Replace the blade.
(See page 15.)
4. Have the battery replaced by an
authorized service centre.
Charge the battery for
approximately 8 hours
continuously to rejuvenate it.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.)
Contact an authorized service
centre for repair.
Problem Action
The main body
cannot be
charged.
Insert the appliance plug into the
main body firmly.
Check the charge status lamp
glows. (See page 9.)
Makes a loud
sound.
Apply oil. (See page 15.)
Confirm that the blade is properly
attached.
Blade life
Blade life varies according to the frequency and period
of use of the main body.
For example, the blade life is approximately 3 years
when using the main body for 10 minutes four times a
month. Replace the blades if cutting efficiency reduces
substantially despite proper maintenance.
Battery life
Battery life will vary according to the frequency and
length of use. If the battery is charged once a month,
the service life will be approximately 3 years.
If the operating time is significantly shorter even after a
full charge, the battery has reached the end of its life.
PB017538 - ER-GK75������_(01GB)_04-04-19.indd 16 2019/4/4 15:09:13