10
English
Using the comb attachment
Make sure that the trimmer is turned off.
1. Turn the dial to the “1” position.
2.
Mount the comb attachment to the
main body until it clicks.
3.
Turn the dial to the desired indicator
(between 1 mm (1/32˝
) and 10 mm (13/32˝
)).
Indicator
1
2
3
4
5
Trimming
height
(estimate)
mm 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
inch 1/32 1/16 5/64 3/32 1/8 9/64 5/32 11/64 3/16 7/32
Indicator
6
7
8
9
10
Trimming
height
(estimate)
mm 6 6.5 7 7.5 8 8.5 9 9.5 10
inch 15/64 1/4 9/32 19/64 5/16 11/32 23/64 3/8 13/32
When trimming a short beard, it is effective to increase the
number of trimming times in order to keep the beard uniform
at the desirable length.
It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm (1/64˝ ))
Actual hair length will be a little longer than the height you set.
Using the trimmer
Make sure there is no damage to the blade.
The appliance may not operate in an ambient temperature
lower than approximately 0 °C (32 °F).
Dry trimming
Trimming with the comb attachment
Do not use when the beard is wet.
A wet beard may stick to the skin or bunch up, making it
difficult to trim.
1.
Mount the comb attachment and adjust the dial.
(See this page.)
2.
Slide the power switch to the “
”
position to turn on the trimmer.
3. Hold the trimmer with the power
switch facing upward, and cut the
beard by moving the trimmer back
against the flow of the beard.
Hair trimmings may collect inside the
attachment when a large volume of
beard is cut, so discard hair trimmings
after each use.
PB013743 - ER-GB370
_(01EN)_07-22-16.indd 10
2016/7/22 10:31:28
Summary of Contents for ER-GB370
Page 2: ...2 PB013743 ER GB370 _ 01EN _07 22 16 indd 2 2016 7 22 10 31 26 ...
Page 45: ...45 MEMO PB013743 ER GB370 _ 03ES _07 22 16 indd 45 2016 7 22 10 33 46 ...
Page 46: ...46 MEMO PB013743 ER GB370 _ 03ES _07 22 16 indd 46 2016 7 22 10 33 46 ...
Page 47: ...47 MEMO PB013743 ER GB370 _ 03ES _07 22 16 indd 47 2016 7 22 10 33 46 ...
