background image

47

46

1. Hold down 

until you reach the desired angle.

• Holding the button down will recline the seat and raise the legrest.
• Shortly after the backrest starts to recline the legrest will be raised.
• When both the backrest and legrest have been raised or lowered as far

as possible you will hear a “beep-beep-beep” sound.

• The backrest and legrest may reach their limits at different times.
• Adjust the position of the back cushion so that it does not come into

contact with your elbows.  

2. Release 

when you have reached the desired

position. 

• If you have reclined the back more than you want, press 

to raise it

again.

• Do not recline the back too far when first using the unit as you may find

the massage to be too strong.

Raising the Backrest and Legrest

Hold down 

to raise the backrest and legrest

• When both the backrest and legrest have been raised as far as

possible you will hear a “beep-beep-beep” sound.

ADJUSTING THE SEAT

Raising and Lowering Only the Legrest

Raising the Legrest

Hold down 

to raise the legrest.

• When the legrest has been raised as far as possible you will hear a

“beep-beep-beep” sound.

Lowering the Legrest

Hold down 

to lower the legrest.

• When the legrest has been lowered as far as possible you will hear a

“beep-beep-beep” sound.

• Ensure that the legrest slide has been fully retracted before lowering

the legrest otherwise it will hit the floor (see below).

Extending the Legrest

1. Slide the legrest out to the desired position by

pulling the legrest slide lever.

2. Release the legrest lever.

Reclining the Massage Lounger

1

2

Approx. –5°

Approx. 85°

Approx. 

170°

Approx. 120°

Push the legrest
down with the backs
of your legs.

Legrest Slide Lever

Once you have released the legrest
slide lever the legrest will click into
place and lock.

When you wish to retract the legrest, pull the legrest slide lever to
release the legrest.  Raise your legs slightly to allow the springs to
retract the legrest.

Additional Information

Display of Massage Areas

Sometimes the massage areas displayed on the control panel will be different from what
you are actually experiencing.
* Due to limitations in the size of the display, the massage areas displayed on the control panel

are only a general indication of the area being massaged.  This means that sometimes the
areas that are actually being massaged are different from those shown on the display.  Areas
of massage displayed may change depending on changes to massage intensity or position of
massage heads.

Pressure Level Display

The pressure being applied to the body is shown on the display.
• The actual pressure experienced may vary from the level indicated on the display.
• Depending on the seatback fabric, the pressure level indicated may change even when nobody is sitting in the seat.

Pressure Feedback Function

The strength of the massage (pressure level) is automatically adjusted if it is too much or too little. 
• The standard body pressure level varies according to the strength of the program selected.

Programmed Operation

• Please see Page 58 for details regard the lower body massage.
• The movements below are shown in simplified form for the sake of illustration.

 Shoulder grasp 

and Shiatsu A

 Tap A and Roll

 Shiatsu A, 

    Shoulder grasp 

and Tap A

 Shiatsu A,

    Shiatsu B and 

Knead A

 Knead B and Roll

 Shoulder grasp, 

    Shiatsu A and 

Knead B

 Knead A and 

    Tap B

 Shiatsu B, Tap A 

and Knead B 

 Tap B, Knead B 

and Roll

 Shiatsu A and 

    Knead B

 Swedish and Roll

 Knead A and 

Knead B

 Knead A and 

    Tap B

 Knead B and Roll

 Shiatsu A and 

Knead B

 Knead A and 

    Tap B

 Knead B and 

    Shiatsu B

 Swedish, Roll 

and Tap B

 Knead B and 

Swedish

 Knead B and 

    Tap A

 Knead B and Roll

 Swedish, Knead B 

and Tap B

 Knead A, Tap B 

and Knead B

 Tap B, Swedish 

and Knead B

 Knead B, Knead A 

and Tap B

 Knead A, Knead B, 

Swedish and 

    Tap B

 Swedish, Roll 

and Tap B

 Shiatsu A and 

Knead B

 Tap A and Roll

 Knead B, Tap A 

and Shiatsu A

 Knead A, Tap B, 

Roll and Tap B

 Knead A and 

    Tap A

 Knead B, Tap B 

and Tap C

 Knead B 

 Tap C, Roll, 

    Tap B and Roll

 Swedish and Roll

Shiatsu Program

Deep Program

Gentle Program

Refresh Program

Summary of Contents for EP3205


















Reviews: