EN6
Power plug, power cord etc
Do not do anything that may damage
the power cord or power plug.
Do not scratch, modify, use near a
heater, excessively bend, twist, pull,
place heavy objects on top of, or
bundle the cord or plug.
(Otherwise it may lead to electric shock,
burning or fire due to a short circuit.)
→
Please contact an authorized service
center for repairs to the power cord or
power plug.
Do not insert or unplug the power plug
with wet hands.
(Otherwise it may lead to electric shock.)
Always use sockets and wiring devices
at the correct rated value.
Use an AC 220 V 50 Hz.
(Cannot be used overseas, nor with a
transformer. Otherwise it may lead to
electric shock or fire due to overheating.)
Always insert the power plug fully into
the socket.
(Otherwise it may lead to electric shock
or fire due to overheating.)
Dust the power plug on a regular basis.
• Remove dust using a dry cloth.
(Otherwise it may lead to fire, due to
damp shorting the insulation.)
When unplugging the power plug, hold
the plug itself and do not pull on the
power cord.
(Otherwise it may lead to electric shock,
burning or fire due to a short circuit.)
Symptoms
Persons who are otherwise healthy but have any of the
conditions listed below should consult with their physicians
before using the unit.
(1) Persons whose muscles have deteriorated due to age
or weight loss
(2) Persons with symptoms of lower back and hip pain
caused by the bones, muscles, organs and nerves
(3) Persons who suffer bruises or sprains easily
(4) Persons who suffer from severe motion sickness
(5) Persons who have undergone heart or internal
surgery in the past
(Otherwise it may lead to fire, due to adversely affect health.)
If symptoms such as rashes, reddening, itching, etc. occur as a
result of using this unit, stop using the unit and consult a physician.
(Otherwise it may lead to accident or adversely affect health.)
Installation and movement
The unit should not be used on top of heating appliances,
such as electric carpets, etc.
(Otherwise it may lead to a fire.)
Do not drag or push the unit in an installed state.
Do not move the unit using the wheels on the flooring.
(Otherwise it may lead to the damage of flooring.)
Do not move with a person on it.
(Otherwise it may lead to falls, causing an accident or injury.)
When moving the unit, do not hold it by anything else except
for the plastic part on the Leg/Foot Massage Section.
(It may slide in movement, causing injury.)
Do not use in damp or humid places such as a bathroom.
(Otherwise it may lead to electric shock.)
Use only on a horizontal surface.
(Otherwise it may lead to a falling accident.)
Place a mat or other such covering on the floor when
moving the unit using the wheels.
(Unit may damage the flooring.)
Before moving the product, make the Leg/Foot Massage
Section back to the original position by adjusting its angle.
(Otherwise it may lead to injury.)
When moving the unit on its wheels, remove any
obstacles from around the unit, move the backrest to the
fully upright position, lift the Leg/Foot Massage Section
below the waist (less than 80 cm from the floor) and
move the unit slowly. (EN13)
(Otherwise the unit may fall and cause injury.)
Power supply
Connect the unit with the correctly grounded socket for safety.
Otherwise, electric shocks may happen.
(Electric shocks may be caused by faults or electric leakage.)
Always unplug the power plug from the wall socket when
cleaning the unit or removing the cover.
(Otherwise it may lead to electric shock or injury.)
Always unplug the power plug from the wall socket when
not using.
(Since dust and humidity deteriorates insulation, which may
result in fire due to electrical leakage or fire.)
Important safety instructions
(Continued)
WARNING
When there is any
abnormality or fault
If a malfunction or breakdown occurs,
stop using the chair immediately and
unplug the power plug from the wall
socket.
(Otherwise it may lead to smoke, fire or
electric shock.)
<Examples of malfunctions/breakdowns>
• Does not start when pressing
.
• The power supply goes on and off
when the power cord is moved.
• Burning smells or abnormal sounds
occurring during operation.
• The unit becomes deformed or
unusually hot.
→
Contact an authorized service center
immediately for inspection/repairs.
Summary of Contents for EP-MA32
