PAN1740A Bluetooth Module
9 Dialog Serial Port Service (DSPS)
Module Integration Guide Rev. 1.1
Page 32 of 44
The tab
RX/TX
allows similar functionality as the tab
Console
, but enables to send data
character by character manually or based on a cyclic sending interval which can be determined
by the user.
The tab
File
enables to send data files instead of character strings. After the definition of a
connection interval, the file directory of the device can be browsed to select the desired file.
9.2 Two Pro Kits with PAN1740A Adapter Board
Similar to the previous example it is possible to use two of Dialog’s Pro Kits with PAN1740A
Adapter Boards to emulate a serial port.
Note the hardware flow control changes (jumper or source code) required as
explained in
9.1 Pro Kit with PAN1740A Adapter Board (iPod)
Set up one Pro Kit with the application software
sps_device
and the other Pro Kit with the
application software
sps_host
by downloading the .hex-files onto the Pro Kits.
The host will be discovered and connected to the device.
A Terminal can be launched (for instance the Smart Snippet Terminal) and ex-
change data.
9.3 Two PAN1740A USB Sticks
Establish a serial port connection with two PAN1740A
USB sticks
The
da14580_config.h
of the host and the device source code has to be amended.
1. Change the flow control mode from the default hardware flow control to software flow
control.
