PAN1740A Bluetooth Module
9 Dialog Serial Port Service (DSPS)
Module Integration Guide Rev. 1.1
Page 33 of 44
2. Disable the sleep mode, as this is not fully supported for software flow control.
3. Compile the amended source codes.
4. Download the output .hex-files onto the sticks by using Dialog
’s
Connection Manager
or
Keil µVision
®
.
Note that it is not possible to run the sticks with Dialog
’s Smart Snippets.
5. Launch two terminals (e.g. Tera Term) with the corresponding COM port and the
following settings:
– Baud Rate: 115 200 bps
– Data Bits: 8
– Stop Bits: 1
– Parity: None
– Flow Control: Xon/Xoff
6. Start data exchange.
The data transmission happens immediately. One terminal window will stay empty
for unidirectional data transfer as depicted below.