Usage
24
Operating Instructions
Setting the Projector
Set up your projector as instructed below.
About Positioning the Image
•
When you are projecting an image, make sure the
image is inside the screen frame.
Project the Image as a Rectangle
•
Adjust the location of the projector to project at a
right angle with the elite Panaboard.
•
If the image is projected trapezoidally, the position
may not be read correctly. Adjust the projector so
that the projected image is a rectangle. Refer to your
projector’s documentation for information on
adjusting the projected image.
Set the Proper Resolution
•
Set your computer’s and projector’s resolutions to
the most appropriate setting.
If the resolution is not set properly, the image will be
difficult to see. Particularly, if the projector’s
resolution is lower than the computer’s, thin lines can
appear cut or broken. Refer to your projector’s
documentation for information on adjusting the
resolution.
Do Not Look Directly into the Projector Lamp
•
When using a projector, try to avoid looking directly
into the projector lamp. Doing so can hurt your eyes.
UB-T880-PJQXC0337ZA_mst.book 24 ページ ２０１０年５月１１日 火曜日 午後１時９分
