Panasonic EH2473, Operating Instructions Manual

Page: 21 / 36

21
English
How to use the ion steamer
1
1
Insert the plug into a power outlet and press the
switch.
Only the “
ޔ㙸
” lamp blinks.
Push the “
⬉⑤
” (power) switch firmly. (Even if a click is heard, push
it further. If the switch is not pushed far enough, the “ ⬉⑤ ” (power)
switch will return, and the power will not turn on.)
2
2
Press the switch to select your favorite course.
Each time you press the “ ᡸ⧚䗝ᢽ ” (course selection) switch, the
course changes from “Clear skin”, “Skin fitness/Elasticity”, “Sebum
care” and “Hot steam”.
The lamp blinks until the selected course starts.
Refer to “Recommended basic patterns” on page 25.
3
3
Press the switch to start the selected course.
The course indication lamp or the “ ⏽⛁㪌≑ ” (hot steam) lamp turns
on.
The micro sized ion steam is released after about 30 seconds.
Steam and mist are released alternately according to the selected
course.
Since the steam and mist are released from different outlets,
position your face for uniform exposure to the steam and mist.
When an appliance releases steam, some hot water drops may
come out. This is normal.
The mist is not released in the Hot steam course.
Press the “
ذℶˋᓔྟ
” (stop/start) switch in the middle of the
selected course to interrupt the course. Press the “ ذℶˋᓔྟ ”
(stop/start) switch once more to start the course again from the
beginning.
Press the “
ᡸ⧚䗝ᢽ
” (course selection) switch in the middle of the
course to start the switched course from the beginning.
4
4
Adjust the angle (up/down) of the nozzle.
Adjust the angle by holding both
edges of the nozzle cap while
taking care not to touch the steam
directly.
5
5
Once the selected course
has been completed, the appliance stops automatically.
Only the Clear skin course indication blinks.
●
●
●
●
●
●
●
●
●
●
●
(+B&+LQGE