English
Check indication
Lamp status
Possible cause
Remedy
[Lit] “
检测指示灯
” (check)
lamp (red)
Water supply
tank empty.
(In the steam
mode)
Fill the water
supply tank
with water up to
“
满水位
”
(FULL).
(See page .)
Appliance is not
on a level
surface.
Place on a level
surface.
Appliance is
sitting on a mat
or a carpet.
Place on a
solid, flat
surface such as
a table or a tray.
Fault indication
Lamp status
Possible cause
Remedy
[Blinking] All lamps
Internal safety
device has
triggered.
Switch the
appliance off
and on again.
If the safety
device triggers
repeatedly,
contact the
store where the
appliance was
purchased or
an authorized
service center.
EH-SA60_CH.indb 43
2011/06/29 18:18:00
