Panasonic EH-HS50, Operating Instructions Manual

Page: 8 / 16

English
Parts identification

Negative ion nozzles
B
LED indicator
C
Iron plates
D
Press plate
E
I/O slide switch





How to use the hair straightener
1. Switch on the hair straightener.
The LED indicator will light up.
. Wait about minutes till the iron plates become hot.
. Clamp strands of hair between the
iron plates.
Make sure that the hair is centered
between the iron plates.
•
. Pull the hair straightener straight slowly towards the
tips (ends) of your hair, and then loosen your grip
slowly.
Excessive pressure may cause damage to hair.
. Repeat this process, applying sufficient pressure as
you pull the hair to achieve the desired effect
according to hair type.
. After use, switch off the power and unplug the hair
straightener from the electrical outlet.
•
•
27. Only use the appliance for the intended
purposes.
28. If the supply cord is damaged, it must be
replaced by the manufacturer, its service center,
or similarly qualified persons in order to avoid a
hazard.
29. If the cord or plug is damaged, stop using it
immediately and contact an authorized
Panasonic service center.
30. When not in use, disconnect the appliance and
store it in a dry and safe location, keeping it out
of the reach of children. Do not jerk or pull on the
cord where it connects to the plug. Do not wrap
the power supply cord around the appliance.
Allow the cord to hang loose and straight.
31. Exercise caution when using the appliance. The
iron plates of the appliance will get very hot and
avoid contact with the skin after the appliance is
switched on.
32. This hair straightener is maintenance free. If
cleaning is necessary, disconnect the hair
straightener from the power source and wipe the
exterior with a damp cloth.
If any abnormal condition occurs, unplug the hair
straightener and allow it to cool and take it to an
authorized Panasonic service center for repair.
Never attempt to repair the hair straightener by
yourself.
EH-HS50_CH.indb 8 2009/05/28 18:48:06