Panasonic EB-GD93, Operating Instructions Manual, Page: 42 / 72

WAP Browser
The phone’s WAP (Wireless Application Protocol) Browser enables you to access
internet services supported by the network, such as news, weather reports, sport etc.
Server Settings
Before you can access internet services, your SIM must be data enabled and the
relevant configuration information, entered into the phone.
These settings may have been pre-programmed for you by the network operator.
Note: Modifying previously entered settings can cause failure of the Browser.
1 From Idle mode press
B 423
to enter the Server Setting menu
2 Two servers may be setup on the phone. Use
e
to select one or other of the
server settings
3 Use
f
until Edit is displayed in the option area and press
B
A list of configuration parameters will be displayed. The parameter Name will be
highlighted and Edit will be displayed in the option area
4 Press
B
5
Enter the name of the WAP server and press
B
6 Use
e
to select each of the other parameters in turn and press
B
in order to
enter the information
7 Press
B
and select the next parameter in the list
8 After all parameters have been entered, press
C
to return to the previous menu
level
9 Use
f
until Set is displayed in the option area and press
B
to store the
settings
Record your WAP settings in the table at the rear of this booklet for easy
reference.
Activating the Browser
The Browser can be activated either by:
From Idle mode pressing and holding the
P
key
or
From Idle mode press
B 41
38
WAP Browser