Getting Started
Thank you for purchasing this Panasonic digital cellular phone. This phone is
designed to operate on the Global System for Mobile Communications (GSM),
GSM900 or GSM1800. Ensure the battery is fully charged before use.
Before operating this phone please read the “Important Information” section -
see page 48
.
These operating instructions detail use of the equipment contained in the Main Kit.
Some services detailed herein are network dependent or may only be available on a
subscription basis. Some functions are SIM dependent. For more information contact
your Service Provider.
Fitting the SIM
The SIM is inserted into the back of the
phone underneath the battery.
Place the SIM in the recess at the rear
of the phone (1) ensuring the bevelled
corner is positioned in the top right
corner. Slide the SIM to the left (2) using
light pressure until it is located under the
lugs and the SIM retaining clip has
clicked into position (3).
Removing the SIM
Ensure the SIM retaining clip is pressed
down (1) and while holding this down
slide the SIM to the right (2). Once clear
of the lugs the SIM can be lifted out of
the recess.
Fitting the Battery
Fit a fully charged battery pack. If the
battery pack is not fully charged then it
must be charged as described in the
“Charging the Battery” section.
Locate the top of the battery into the
rear of the phone (1). Push the bottom
of the battery into place until it locks into position (2).
1
Getting Started
Summary of Contents for EB-GD92 Series
Page 63: ...Notes 59 Notes ...
Page 64: ...60 Notes ...
Page 65: ...61 Notes ...
Page 68: ...Printed in UK www mcuk panasonic co uk 00 290 7LB825A ...