Panasonic DVD-S75EG, Service Manual

Page: 46 / 132

2. Firmware version of the player is automatically checked.
Appropriate message appears whenever necessary.
3. Using remote controller's cursor key, select whether version
updating is to be done or not. (Selection of Yes/No)
4. a. If Yes is selected, version updating is performed.
b. If No is selected, only recovery is performed.
5. a. When updating is finished, remove the disc according to the
message appearing on the screen.
b. Remove the disc according to the message appearing on the
screen.
6. Turn off the power.
Note:
If the AC power supply is shut out during version-up due to a power failure, the version-up is
improperly carried out.
In such a case, replace the FROM and carry out the version-up again.
12. ADJUSTMENT PROCEDURES
12.1. Service Tools and Equipment
Application Name Number
Tilt
adjustment DVD test disc DVDT-S15 or DVDT-S01
TORX screw driver (T6) Available on sales route. (T6
or RFKZ0185)
Inspection Extension cable (module P.C.B. to mother
P.C.B.) JGS0098
Extension cable (module P.C.B. to mother
P.C.B.) JGS0116
Others Hanarl VFK1784
Grease RFKXPG641
Drysurf RFKXGUD24
Confirmation CD test disc PVCD-K06 or any other
commercially available disc
VCD test disc PVCD-K06 or any other
commercially available disc
Recovery disc RFKZD03R004
12.2. Important points in adjustment
12.2.1. Important points in optical adjustment
- Before starting optical adjustment, be sure to take anti-static