Error
Code
Error Content
Additional error explanation
Defect 1 Defect 2 Defect 3
U11
Focus error
Focus coil, FE singal error
TRV Unit DV4.1
(IC8001)
H01
Tray loading error LD motor error, DV4.1 (IC8001) error
LD
Motor
IC8251
H02
Spindle servo
error
(Spindle servo, DV4.1 (IC8001) SP
motor, CLV servo error)
LD
Motor
DV4.1
(IC8001)
H03
Traverse servo
error
Traverse servo, DV4.1 (IC8001) , TRV
motor error
TRV
Motor
DV4.1
(IC8001)
H04
Tracking servo
error
Tracking coil, DV4.1 (IC8001) error
TRV Unit DV4.1
(IC8001)
H05
Seek error
TRV Motor, IC8251 error
TRV
Motor
IC8251
H07
Spindle motor
drive error
SP motor current error, IC8251 error
TRV Unit IC8251
F893
FROM
falsification
Firmware soft error, DV4.1 (IC8001)
error
FROM
(IC8651)
(*1)
DV4.1
(IC8001)
F895
Language area
abnormality
Firm version agreement check for
factory preset setting failure
prevention
FROM
(IC8651)
(*1)
F897
initialize is not
completed
Initialize completion check for
factory preset setting failure
prevention
Note:
An error code will be canceled if a power supply is turned OFF.
*1: When FROM or Module P.C.B is replaced ,be sure to write the
present value into the player as the initial setting of laser drive
current . (Refer to section 8.5 initial setting of laser drive current .)
Writing method :
a. Press the "PAUSE" button on the remote control unit while
pressing the "PLAY" and "OPEN/CLOSE" buttons on the player.
b. Turn off the second power.
8.4. Last Error Code saved during NO PLAY
30
PDF created with pdfFactory Pro trial version
