Panasonic DVD-CP72P, Service Manual

Page: 26 / 92

Step 1 Unscrew the screws.
Step 2 Remove the spring holders and the springs.
Step 3 Pull out the drive shaft and guide shaft.
11.11.1. Precautions in optical pickup
replacement
The optical pickup can be damaged by static electricity
from your body. Be sure
to take static electricity
countermeasures when working around the optical pickup.
(Refer to the related page in this Manual about the
countermeasures.)
1. Do not touch laser diode, actuator and their peripheries.
2. Do not use tester to check laser diode. (Laser diode can be
damaged easily.)
3. The use of soldering iron with anti-static feature is
recommended when providing short-circuit to laser diode or
when removing it.
4. Solder the land on flexible cable of optical pickup unit.
Caution
· When using the soldering iron without anti-static feature,
short circuit the flexible cable terminal with a clip before
short-circuiting the land.
·
After intended repair is finished, remove the solder for
short-circuit of laser diode in a correct way following the
procedure described in this Manual.
11.11. Optical Pickup Unit
11.12. Disassembling the Spindle Motor Unit
Step 1 Remove the floating rubbers.
26
DVD-CP72P