manualshive.com logo in svg

Panasonic DVCPRO50 AJ-D960EG, Operating Instructions Manual

Share
Download
Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual Download Page 67

ENGLISH

67 (E)

Setup menus

USER menu

<OPERATION> 

(continued)

Item

Setting

No.

Superimposed

No.

Superimposed

Description

display

display

116

EJECT

 0000

  MODE1

LAMP

0001

       MODE2

130

MULTI CUE

 0000

       OFF

0001

ON

131

PAGE MODE  0000

    MANU

 0001

        AUTO

132

ROTA MODE  0000

       OFF

0001

ON

The underline on the setting item denotes the initial setting.

Selects whether the EJECT lamp is to remain lit or be turned
off in the cassette out status.
0: The EJECT lamp remains lit.
1: The EJECT lamp goes off.

Selects ON or OFF for the multi-cue function.
0: Multi-cue function OFF
1: Multi-cue function ON
<Notes>
• Editing cannot be performed when ON has been selected as

the multi-cue function setting.

• When the multi-cue function is set to ON in the editing mode

selection status, the editing channel selection buttons are
automatically released.

• When the multi-cue function has been set to ON, the deck-

to-deck facility cannot be used.

• When the multi-cue function has been set to ON, the mode

cannot be indicated on the front panel counter display.

Selects the cue point registration operation when the multi-
cue function has been set to ON.
0: Registration takes place on the selected page, and 8 cue

points can be registered.

1: When the page on which cue points are being registered

has been filled, registration automatically continues on the
next page. A total of 80 cue points can be registered on up
to 10 pages.

Selects the registration operation which is to be performed if
all the cue points have already been registered when the
multi-cue function has been set to ON.
0: The registration operation is not performed.
1: The registration operation is continued. If “MANU” has

been selected as the setup menu No. 131 (PAGE MODE)
setting, the cue point is registered in CUE

1 on the same

page; if “AUTO” has been selected, it is registered in
CUE01.

Summary of Contents for DVCPRO50 AJ-D960EG

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands