C.
Rotate the right hand knob clockwise to select the next set of
CAM1 IP ADDRESS
values, using the knobs
beneath the number that you want to change, set the address values required.
D.
Rotate the right hand knob clockwise to highlight the
PORT
number, using the knob beneath the
PORT
number set the number to be 49152.
E.
Press the knob below
CAM1 INF UPLOAD (push).
A popup saying COMPLETE will appear. Press the 3
rd
knob from the left.
F.
Press the
MENU
button to exit.
4.5 Setup of Panasonic VariCam LT for use with DTS1810U Basestation ERI.
A.
On the VLT Control Panel press the
MENU
button.
B.
Highlight and select
LAN PROPERTY.
C.
Select
DCHP
and set to
DISABLE
.
D.
Select
IP ADDRESS
and set to the required address. In this example, 192.168.1.002. This must be the same
as address set in the ERI - IP Adjust: - CAM Adjust: menu. Select
OK
when finished.
E.
Select
SUBNET MASK
and set to the required value i.e 255.255.255.0. This must be the same as set in the
ERI - IP Adjust: - menu. Select
OK
when finished.
F.
Select
DEFAULT GATEWAY
and set to the required address i.e 192.168.1.1. This must be the same as set in
the ERI - IP Adjust: menu. Select
OK
when finished
G.
Highlight
EXIT
and select it. The Network will restart.
H.
Highlight and select
NETWORK SEL
and set to
LAN.
I.
Highlight
EXIT
and select it.
J.
To set up a User Account Refer to Panasonic ‘Multicam White Paper’
K.
NOTE: for ROP operation select SCENE 1 under Main Colour Setting.
5. VLT Settings for Cine Live 4K.
5.1 Notes on Video Setting.
Resolution: 3840 x 2160.
Frequency: 50/59.94P
SDI OUTPUT: Ensure Processed RAW not RAW is selected.
Codec: AVC-I4KLT
Summary of Contents for DTS-1800-U6GPDR
Page 12: ......
