Hysteresis mode
The comparative output ON / OFF state can be controlled with randomly set hyster-
Z&
0
Pressure
Comparative
output
H (Hysteresis)
Hi
%
ON
OFF
H: 1digit or more
2 digits or more when using psi
unit for use outside Japan
Notes: 1) “
” or “
” is displayed for comparative output 1 and “
” or “
” for comparative output 2 on the
&
2) When the pressure sensor head is compound pressure type or positive pressure type, high pressure indicates
“
” and low pressure indicates “
,” while in case of vacuum pressure type, high vacuum indicates “
”
and low vacuum indicates “
_
Window comparator mode
In this mode, the ON or OFF state of the comparative output is controlled with a
0
Pressure
Comparative
output
H (Hysteresis)
H (Hysteresis)
Hi
%
ON
OFF
`J` [&;)L@
When the pressure sensor head is
compound pressure type or posi-
tive pressure type, hysteresis is
&
When the pressure sensor head is
vacuum pressure type, hysteresis
*Z&
Notes: 1) ` [&jq#
in “
9
PRO MODE
_#
2)
“
” or “
” is displayed for comparative output 1 and “
” or “
” for comparative output 2 on the
&
3) When the pressure sensor head is compound pressure type or positive pressure type, high pressure indicates
“
” and low pressure indicates “
,” while in case of vacuum pressure type, high vacuum indicates “
”
and low vacuum indicates “
_
=@*%&&`& [&*Z
7
RUN MODE
Setting the threshold value
Refer to
<Comparative output 1 / 2 output mode setting>
in “
8
MENU SET-
TING MODE
_#&
!& &&*"& &&
Comparative
output 1
Comparative
output 1
Comparative
output 1
Comparative
output 2
Comparative
output 2
Comparative
output 2
EASY mode
(Comparative output 2 is OFF)
EASY mode
Hysteresis mode /
Window comparator
Z&%&
Hysteresis mode /
Window comparator
Z&`&
(Note 3)
Press
When the pressure sensor head is compound pressure type or positive pressure type
!&*&
When the pressure sensor head is vacuum pressure type
!&*&*Z&
Press
When the pressure sensor head is compound pressure type or positive pressure type
!&*&&
When the pressure sensor head is vacuum pressure type
!&**Z&
Automatic
? & &
(Note 2)
Blinks alternately
Notes: 1) If the set pressure range is exceeded, “
” (exceeds the upper limit) or “
” (exceeds the lower limit) will
& “
”#`&&*[&%&&
* Z&&ZZ&_&*
U@#*&Z&Z*& &
For details, refer to “
11
AUTO-REFERENCE FUNCTION
” and “
12
REMOTE ZERO-ADJUSTMENT FUNCTION
_
3) In the dash line box is not displayed when not setting “
” or “
_[]
method, refer to
in “
8
MENU SETTING MODE
_
Zero-adjustment function
The zero-adjustment function forcibly sets the pressure value to “zero” when the
&
Automatic
Hold down
)J z*#&Z&&*&
Key lock function
The key lock function prevents key operations so that the conditions set in each set-
Z&&* &
<Key lock set>
Automatic
Hold down
<Key lock released>
Automatic
Hold down
Peak / bottom hold function
The peak / bottom hold functions display the peak value and bottom value of the
The peak value is displayed on the main display and the bottom value is displayed
&
When the pressure sensor head is compound pressure type or positive pressure type, the
higher pressure side indicates the peak value, while the lower pressure side indicates the
Z*Q&*Z *-
Z&&(**Z&&Z*
<Peak / bottom hold set>
Hold down
Blinks alternately
<Peak / bottom hold released>
Hold down
8
MENU SETTING MODE
The mode will change to RUN mode when the mode selection key is held down
& & & Z # & &
Z&( *
RUN mode
<Comparative output 1 output mode setting>
EASY mode
Hysteresis
mode
{#U
Window
comparator
mode
<Comparative output 2 output mode setting>
EASY mode
Hysteresis
mode
Window
comparator
mode
OFF mode
))$;QZ*UZ&]]@
)$
)
))$;QZ*UZ&]]@
LJ)
UJ)
LJ)$
UJ)$
LJ)
UJ)$
LJ)$
UJ)
<Response time setting>
UXZ
<XZ
1ms
5,000ms
<Display color of the main display selection>
Red when ON
Green when OFF
Green when ON
Red when OFF
Always red
Always green
<Unit selection> (Note 1)
kPa
MPa (Note 2)
bar
inchHg (Note 3)
kgf/cm
2
psi
mmHg (Note 3)
RUN mode
<External input selection>
<Analogue voltage / current output selection>
Auto-refer-
ence input
Analogue
voltage out-
put mode
Remote
zero-adjust-
ment input
Analogue
current out-
put mode
OFF
Notes: 1) When positive pressure type of the pressure sensor head is connected to the controller for use inside Japan,
"{_({_QZ& *Z &
& &
2) When compound pressure type or vacuum pressure type of the pressure sensor head is connected to the con-
troller for use outside Japan, “
_& &
3) When positive pressure type of the pressure sensor head is connected to the controller for use outside Japan,
& &
Setting item
Factory setting
Description
Comparative output 1
output mode setting
#Z*L
Comparative output 2
output mode setting
#Z*U
))$
)Z;)@Z;)$@&
The initial state when the comparative output 2 output mode setting is set to
other than OFF shows “
_
Analogue voltage / cur-
rent output selection
*
External input
selection
#Z&Z
Response time
setting
Z
! Z & #Z <XZ LZ UXZ XZ L<Z
UXZX<ZL<<ZUX<ZX<<ZL<<<ZX<<<Z
Displayed color of the
main display selection
? &#Z&&
Unit selection
{&
When compound pressure type or vacuum type of the pressure sensor head is
connected to the controller for use outside Japan, the initial state shows “
_
