Panasonic DP-UB450EB-K, Operating Instructions Manual

Page: 31 / 38

- 31 -
Reference
Audio
Cannot switch audio.

The audio cannot switch, if “Digital Audio
Output” is set to “Bitstream” or “On”*. Set
“Digital Audio Output” to “PCM” or “Off”*.
(

24)
* For “DSD Output Mode”
Cannot hear the desired audio.

Check the connections and the “Digital Audio
Output” settings. (

11, 24)

UB450 UB159
To output audio from a device
connected with an HDMI cable, set “HDMI
Audio Output” to “On” in the Setup menu.
(

24)

UB450 UB159
When connecting this unit
to a TV via an HDMI VIDEO OUT and to an
amplifier/receiver via an HDMI AUDIO OUT,
set “HDMI(VIDEO) Output Mode” to “Automatic
( Video Only / Video+Audio )”. (

11, 23)
There is no sound coming out.

UB450 UB159
To output audio using
COAXIAL terminal, set “COAXIAL Down
Sampling” properly. (

25)

Refer to “Connecting to an amplifier/receiver”
(

11 - 12) to check the audio output
settings suited to the connections of your
device.
UB450 UB159
In the following cases, audio is
not output from the terminals listed below:
y
HDMI VIDEO OUT terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and “HDMI(VIDEO)
Output Mode” is set to “Automatic ( Video
Only / Video+Audio )” (

23)
– When “HDMI Audio Output” in “Digital Audio
Output” is set to “Off” (

24)
y
HDMI AUDIO OUT terminal
– When “HDMI Audio Output” in “Digital Audio
Output” is set to “Off” (

24)
Playback
Disc cannot be played.

The disc is dirty. (

5)

The disc is not finalized. (

7)

Depending on the Ultra HD Blu-ray disc, it may
not be possible to perform playback unless this
unit is connected to the Internet.
Still pictures (JPEG) do not play back
normally.

The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.

Confirm that this unit is connected to the
broadband Internet. (

13)

Confirm the “BD-Live Internet Access” settings.
(

26)

Confirm a USB device is connected to the USB
port. (

9)
Network
I can’t connect to the network.
 Confirm the network connection and settings.
(

13, 14, 26)

Check the operating instructions for each
device and connect accordingly.