Panasonic DP-MB311EU, Operating Instructions Manual

Page: 88 / 144

10.1.7 USB print features
Feature Code Selection
Number of copies
in USB print #660 To set the number of copies to print.
1. MtN A MBNM 6 NM 6 NM 0 N A M OK N
2. Enter the desired number of copies from “
01
” to “
99
” , using the dial keypad.
R The default setting is “
01
” .
3. M OK N A MtN
Recording paper
orientation in USB
print #661 To set the recording paper orientation.
M 1 N “
PORTRAIT
” (default)
M 2 N “ LANDSCAPE ”
Note:
R See page 41 for details.
N in 1 setting in
USB print #662 Using this feature, you can save paper by printing 2, 4 or 8 pages onto 1 page.
The documents’ size will be reduced to fit the recording paper.
M 0 N “
OFF
” (default)
M 1 N “
2 in 1
”
M 2 N “
4 in 1
”
M 3 N “
8 in 1
”
Note:
R See page 41 for details.
N in 1 page border
in USB print #663 To select whether or not to print a line between the pages in N in 1 printing.
M 0 N “
NONE
” (default)
M 1 N “
SOLID LINE
”
Note:
R See page 41 for details.
Duplex in USB
print #664 To select whether to print pages in duplex and also select the type of binding.
M 0 N “
OFF
” (default)
M 1 N “
LONG EDGE
”
M 2 N “
SHORT EDGE
”
Note:
R See page 41 for details.
Continuous in
USB print #665 To select whether documents in different file formats are printed onto 1 page when
using layout printing and duplex printing.
M 0 N “
DISABLED
”
M 1 N “
ENABLED
” (default)
Note:
R See page 41 for details.
Input tray in USB
print #669 To set the input tray to use for USB print.
M 1 N “
#1
” (default): Standard input tray
M 2 N “
#2
” : Multi-purpose tray
M 3 N “
#3
” : Lower input tray
M 4 N “
#1+#2+#3
” , “
#1+#2
” , “
#1+#3
” or “
#2+#3
”
*1
*1 These options are displayed only when the paper size (feature #380 on
page 71, feature #381 on page 71 or feature #382 on page 72) and the media
type (feature #383 on page 72, feature #384 on page 72 or feature #385 on
page 72) match. If either is changed, this setting will be changed accordingly.
88
10. Programmable Features