Panasonic DP-MB300, Operating Instructions Manual

Page: 65 / 116

8. Programmable Features
65
Setting the font number in
PCL
{#}{
7
}{
6
}{
9
}
To set the font number to be used in PCL printing. The unit assigns a number
to each font.
1.
{
Y
}
i
{#}{
7
}{
6
}{
9
}
i
{
OK
}
2. Enter the font number from “
000
” to “
054
” , using the dial keypad.
L
The default setting is “
000
” .
3.
{
OK
}
i
{
Y
}
Note:
L
If the font source in PCL (feature #768 on page 64) is set to “
DOWNLOAD
FONT
” , the default setting is “
001
” .
L
To print the font list, see page 98.
Setting the font pitch/point in
PCL
{#}{
7
}{
7
}{
0
}
To set the font pitch/point to be used in PCL printing.
1.
{
Y
}
i
{#}{
7
}{
7
}{
0
}
i
{
OK
}
2. Enter the font pitch from “
00.44
” to “
99.99
” , or the point from “
004.00
”
to “
999.75
” , using the dial keypad.
L
The default pitch is “
10.00
” and the default point is “
012.00
” .
L
Whether this step is font pitch or point depends on the font number
selected in feature #769 (page 65).
3.
{
OK
}
i
{
Y
}
Setting the symbol set in PCL
{#}{
7
}{
7
}{
1
}
To set the symbol set to be used in PCL printing.
1.
{
Y
}
i
{#}{
7
}{
7
}{
1
}
2. Press
{V}
or
{^}
repeatedly to display the desired symbol set. i
{
OK
}
i
{
Y
}
Setting the line breaks in PCL
{#}{
7
}{
7
}{
2
}
To set each behaviour when receiving CR, LF, and FF codes.
{
1
}
“
CR/LF/FF
” (default): CR=CR, LF=LF, FF=FF
{
2
}
“
CR+LF/LF/FF
” : CR=CR+LF, LF=LF, FF=FF
{
3
}
“
CR/CR+LF/CR+FF
” : CR=CR, LF=CR+LF, FF=CR+FF
Setting the waiting time for
auto continue mode
{#}{
7
}{
7
}{
3
}
To set the length of time before the unit recovers if a memory overflow occurs.
{
1
}
“
OFF
” (default): Deactivates this feature.
{
2
}
“
20s
” : 20 seconds
{
3
}
“
30s
” : 30 seconds
{
4
}
“
60s
” : 60 seconds
{
5
}
“
90s
” : 90 seconds
{
6
}
“
120s
” : 120 seconds
Changing the data timeout
setting
{#}{
7
}{
7
}{
4
}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1.
{
Y
}
i
{#}{
7
}{
7
}{
4
}
i
{
OK
}
2. Enter the desired data timeout setting from “
005
” seconds to “
600
”
seconds, using the dial keypad.
L
The default setting is “
060
” seconds.
3.
{
OK
}
i
{
Y
}
Setting mutual A4/letter print
{#}{
7
}{
7
}{
6
}
This feature allows printing in A4-size even if letter-size recording paper is
loaded, and vice versa.
{
0
}
“
OFF
” : Deactivates this feature.
{
1
}
“
ON
” (default): Printing is possible between A4/letter-size.
Feature/Code Selection