8. Programmable Features
57
Setting the recording paper
size in the standard input tray
{#}{
3
}{
8
}{
0
}
{
1
}
“
LETTER
”
: Letter-size paper
{
2
}
“
A4
”
(default): A4-size paper
{
3
}
“
LEGAL
”
: Legal-size paper
Setting the recording paper
size in the lower input tray
{#}{
3
}{
8
}{
2
}
This feature will be displayed only when the lower input tray is installed (page
74).
{
1
}
“
LETTER
”
: Letter-size paper
{
2
}
“
A4
”
(default): A4-size paper
{
3
}
“
LEGAL
”
: Legal-size paper
Setting the recording paper
type
{#}{
3
}{
8
}{
3
}
{
1
}
“
PLAIN PAPER
”
(default): 75 g/m
2
to 90 g/m
2
paper.
{
2
}
“
THIN PAPER
”
: 64 g/m
2
to 75 g/m
2
paper.
{
3
}
“
THICK PAPER
”
: 90 g/m
2
to 165 g/m
2
paper.
Note:
L
This setting is valid for both the standard input tray and the lower input tray.
L
“
THICK PAPER
”
will not be displayed if any of the paper input tray settings
are changed to
“
#2
”
or
“
#1+#2
”
:
–
fax (feature #440 on page 62).
–
copy (feature #460 on page 63).
–
PCL
®
(feature #760 on page 64).
–
scan to email print feature (feature #565 on page 69).
Setting the waiting time for
the power save mode
{#}{
4
}{
0
}{
3
}
To set the length of time before the unit enters power save mode.
{
1
}
“
5min
”
: 5 minutes
{
2
}
“
15min
”
(default): 15 minutes
{
3
}
“
30min
”
: 30 minutes
{
4
}
“
1h
”
: 1 hour
Note:
L
When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Holding the previous contrast
setting
{#}{
4
}{
6
}{
2
}
{
0
}
“
DISABLED
”
(default): Deactivates this feature.
{
1
}
“
ENABLED
”
: The unit will hold the previous setting.
Note:
L
The previous setting will be held individually for copying.
L
The previous setting will be held individually for sending faxes.
Setting the default operation
mode
{#}{
4
}{
6
}{
3
}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
1
}
“
COPY
”
(default): Copy mode is selected as default.
{
2
}
“
FAX
”
: Fax mode is selected as default.
Note:
L
You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{
4
}{
6
}{
4
}
To set the timer before returning to the default operation mode (feature #463).
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
30s
”
: 30 seconds
{
2
}
“
1min
”
(default): 1 minute
{
3
}
“
2min
”
: 2 minutes
{
4
}
“
5min
”
: 5 minutes
Setting toner save feature
{#}{
4
}{
8
}{
2
}
{
0
}
“
OFF
”
(default): Deactivates this feature.
{
1
}
“
ON
”
: The toner cartridge will last longer.
Note:
L
This feature may lower the print quality by reducing toner consumption.
L
This setting is valid for copying, and when the unit automatically prints
reports/lists.
L
This setting is invalid for printing received faxes.
Feature/Code
Selection
