Panasonic DP-C213I, Operating Instructions Manual

Page: 88 / 98

88
Chapter 3 Other Features
Chapter 3
Other Features
Making Copies with the ADF Opened
The original can be copied without generating dark borders even if the ADF is opened.
Skyshot Mode
Skyshot Mode can be selected in the standard settings.
z When “ 2 Page ” or “ N in 1 ” is selected, only “ Normal ” can be set in Skyshot Mode.
z If there is a white margin, less than 5 mm around the original, the edge of the copy may come out abnormal
(white lines/streaks). To avoid the problem, change the setting of “
Digital Skyshot Mode ” to “ No ”. For setting
of “ Digital Skyshot Mode ”, refer to Copier Settings in the Operating Instructions (For Function Parameters)
on the provided CD-ROM.
1
Open the ADF more than 45 degrees,
and then place the original on the
Platen Glass, leaving it open.
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select copy features if necessary.
4
Enter the desired number of copies.
5
Press the Start key.
z Place the next original, and follow the
instructions described on the touch panel
display.
z After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
Face Down. Align with top left
corner.