Panasonic DP-C213I Operating Instructions Manual Download Page 12

Page: 12 / 98

Chapter 1 Basic Menu Features

1 Color Mode

Color and Monochrome originals can be copied in one specified color.

The color can be selected from the basic colors (Red, Green, Blue, Yellow, Magenta, Cyan), or from
the registered colors.

When 1 Color Mode is selected, Original Type setting selection is not available.

Select “

1 Color

”.

To display this screen, refer to steps 1 to 3 of

Selecting the Color Mode

(see page 8).

Select “

Change Color

”.

The color and the specified name are
displayed.

Select a color from the basic colors or
custom colors, and then select “

”.

When selecting a color from the basic colors.

When selecting a color from the custom colors.

When registering a custom color, refer to

New Color Registration

(see page 14).

: Copying a Full Color original in Cyan.

: Copying a Monochrome original in Cyan.

Summary of Contents for DP-C213I



































































































Search results

Summary of Contents for DP-C213I

Reviews:

Related manuals for DP-C213I

Brands by name

Popular brands

Panasonic DP-C213I, Operating Instructions Manual

Search results

Summary of Contents for DP-C213I

Reviews:

Related manuals for DP-C213I

Brands by name

Popular brands