9
Englis
h
NOTE
1. If your machine sounds an alarm (pi-pi-pi) in Step 4 above, this indicates that the Dialer is Full
(more than 50 full Email Addresses are entered or 50 transmission reservations including G3
communication have been already reserved).
2. To utilize the Email functions, your machine needs to be set up properly on your network.
Please contact your network administrator for actual network setup.
3. Auto Dialer (One-Touch/ABBR.) is only available when stations are registered.
(See page 140)
4. When transmitting in Photo or S-Fine mode, there is a possibility that printing quality may
deteriorate at the remote station due to its reception capability. If this occurs, re-send with
Direct Transmission or use "Fine" Resolution.
5. You can send the same document(s) to multiple stations by repeating Steps 4a, 4b or 4c, and
then pressing
.
6. To stop the transmission, see page 12.
Sending Non-Standard Size Documents
When transmitting non-standard size document(s), the
machine will not send the portion of the document that
exceeds the standard size ("P" portion).
2
3
Select the desired
Transmission setting.
(See the right column)
4a
4b
4c
5
6
The document(s) is stored into
memory with a file number.
Then starts sending the
document(s).
Transmission Settings
When an original is scanned from
the Platen Glass, the message
"ANOTHER ORIGINAL?" is
shown.
Place another original,
then press
.
Machine starts
sending.
START
S-FINE
for finer detailed originals
(400 or 600 dpi, see page 148)
FINE
for detailed originals
STANDARD
for standard originals
(both LED lights go out)
PHOTO
for photo or illustration
originals
TEXT/
PHOTO
TEXT
for text only originals
for text and photo originals
LETTER
: Letter-R
*
ORIGINAL SIZE key is
used for Platen Glass.
*
Legal size with ADF only.
INVOICE
: Invoice
If set on other
function mode.
LETTER
: Letter
INVOICE
: Invoice-R
LEDGER
: Ledger
LEGAL
: Legal
START
Summary of Contents for DP-8020E
Page 18: ...memo 18...
Page 36: ...18 m morandum...