Panasonic DP-4530 Operating Instructions Manual Download Page 58

Page: 58 / 224

Chapter 3 Convenient Fax Features

Deferred Polling

If Polling is requested with a deferred time, it will start polling at the pre-programmed time.

Up to 50 built-in timers can be set for deferred communication.

Polling might not function with all fax machines. We suggest you attempt a trial polling before you actually poll
important documents.

If a password is not set in the polled station, you may poll the other station even though your machine has a
password.

For instructions on how to use polling without a pre-programmed time, refer to

Polling

(see page 60).

Press the

Fax

key.

Select “

More Menus

”.

Select “

Polling

” in “

Deferred Comm.

”

Enter a communication time, and then
select “

”.

Enter the time in the 24-hour format.

: 18: 00

If you make a mistake, select “

Clear

” to

delete entries one digit at a time.

Pre-programmed
Communication Time

Receiver

Sender

Document(s)

Memory

Request to Poll

Summary of Contents for DP-4530

































































































































































































































Search results

Summary of Contents for DP-4530

Reviews:

Brands by name

Popular brands

Panasonic DP-4530, Operating Instructions Manual

Search results

Summary of Contents for DP-4530

Reviews:

Brands by name

Popular brands