20
Bounce recording
For bounce recording, the convenience of the [AUTO] operation can be
exhibited. Bouncing the light off a reflective surface such as a ceiling, etc.
above the flash obtains soft lighting.
Auto bounce recording
1.
The operating procedure is the same as that for normal auto recording.
2.
Determine the position of the subject and then determine the bounce
angle of the flash.
(The flashtube can be tilted from 0
o
to 90
o
upward and the notches are
provided at 0
o
, 45
o
, 60
o
, 75
o
and 90
o
for a click stop.)
3.
Perform a test flash before the actual recording to see if the auto check
indicator lights.
°
For bounce recording, the recording distance is the sum of the distance
between the flash and the reflective surface and that between the reflective
surface and the subject. The auto-effective distance becomes shorter than
normal auto recordings depending on the reflectance of the reflective
surface.
A
B
DMW-FL28E.book 20 ページ 2007年3月6日 火曜日 午前10時21分