82
RQT9249
Changing the unit’s settings
∫
DVB Manual Tuning
You can set channels manually that the DVB Auto-Setup could not
complete successfully.
1
Press [
3
,
4
] to select “DVB Manual Tuning” and press [OK].
2
Press [
3
,
4
] to select the channel you want to set.
3
Press [
2
,
1
] to adjust the frequency.
≥
The frequency rises and falls in steps of 0.166 MHz.
≥
Adjust the frequency by checking the signal strength and signal
quality displays.
[Refer to “DVB Signal Condition” (
>
below) for signal quality
and signal strength.]
4
Press [OK] to start scan.
The set channel is displayed in the table.
5
Press [EXIT] and press [
W X
CH] to check that applicable
channels have been selected.
∫
Add New DVB Services
You can search for newly added terrestrial digital channels to
receive.
1
Press [
3
,
4
] to select “Add New DVB Services” and press [OK].
The unit starts searching for newly available terrestrial digital
channels. This takes about 3 minutes.
A message is displayed when the search is finished.
“No services found” is displayed when no new services can be
found.
2
Press [RETURN] to save the newly found channels.
∫
DVB Signal Condition
You can check the quality and strength of digital broadcast signals.
Realign the aerial if you are receiving a poor signal.
When “DVB Signal Condition” is displayed in grey and cannot be
selected:
1 Press [EXIT] to exit the screen.
2 Press [INPUT SELECT] to select “TV”.
3 Display the Setup menu again (
>
81).
Press [
3
,
4
] to select “DVB Signal Condition” and press [OK].
The quality and strength of the signal are shown.
Press [
W X
CH] to select the channel.
Signal Quality
Below 2 (display red):
The signal quality is so poor that there may be interference in the
pictures and sound.
2–5 (display orange):
The signal quality is basically adequate, but brief interference in the
pictures and sound is possible in isolated case.
Over 5 (display green):
Optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. “0” means signal strength 0%,
“10” means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal amplification at your aerial.
≥
When the signal is weak:
– adjust the position and direction of the aerial.
– adjust the aerial reception with “DVB Manual Tuning” in the
Setup menu (
>
left).
– check that the current digital broadcast channel is correctly
broadcasting.
∫
DVB Preferred Language
Press [
3
,
4
] to select “DVB Preferred Language” and press [OK].
You can select up to 2 different subtitles, audio tracks and teletext to
be used when multi audio, subtitles and teletext digital broadcasts
are received. Select the order of priority.
If the selected language is not available, then the original language
will be selected.
Multi-Audio
Multi-Audio (alternative)
Subtitle
Subtitle (alternative)
Teletext
Preferred Subtitle Type
∫
New Service Message
When a new DVB channel is added, this unit will be informed
automatically. Then the confirmation message appears. If you press
[OK], Auto-Setup starts (all channel settings and all created
categories are deleted. The timer recording programmes are also
cancelled.).
1
Press [
3
,
4
] to select “New Service Message”.
2
Press [
2
,
1
] to select “Automatic” or “Off”.
DVB Manual Tuning
Frequency
MHz
Prog.
New
Service Name
Type
0 10
0 10
[CH6]
498.0
Signal Quality
Signal Strength
RETURN
Select offset
Select channel
Free TV:0
Pay TV:0
Radio:0
Data :0
Searching
Scan
5
69
Channel
Free TV:0
Pay TV:0
Radio:0
Searching
Data :0
Quality
Type
Service Name
RETURN
This will take about 3 minutes.
Add New DVB Services
Signal Quality
Signal Strength
DVB Programme
[CH48] 807 ITV4
DVB Signal Condition
RETURN
Prog. +
Prog. –
0
0
10
10
%*
[English]
[German]
[French]
[Dutch]
[Spanish]
[Portuguese]
[Italian]
[Turkish]
[Danish]
[Swedish]
[Finnish]
[
N
orwegian]
[Polish]
[Basque]
[Catalan]
[Corsican]
[Galician]
[Czech]
[Greek]
[Luxembourgish]
[Slovak]
[Original]
[Standard]
[Hard of
Hearing]
Display subtitles for people who are hard of
hearing.
[Automatic]
[Off]
The service messages are not shown.
DMRXW400EF-RQT9249-L_eng.book 82 ページ ２００８年９月１９日 金曜日 午後６時１４分
