Co
nve
n
ien
t func
tions
VQT3F56
68
Changing the unit’s settings
∫
Channel List
You can edit the Channel List.
¾
To skip unwanted channels
1
Select the channel.
2
Press [OK].
≥
The check mark is removed.
≥
“Yellow” : Clear the all skip setting.
¾
To change the channel number assignment
1
Select the channel, then press the “Green” button.
2
Enter the channel number you wish to reassign with the
number buttons.
3
Press [OK].
≥
If another channel is already assigned to the channel
number you wish to use, the two channels will be
switched.
¾
To set the channel manually
Press the “Red” button.
“Digital TV Manual Tuning” screen appears. (
>
right)
∫
Auto Setup
You can restart the Auto Setup. (
>
18)
Select “Yes”, then press [OK].
∫
Download from TV
Select “Download from TV” when you connect the unit to a
VIERA Link (HDAVI Control 3 or later) compatible TV with an
HDMI cable.
Select “Yes”, then press [OK].
∫
Manual Tuning
You can set each channel manually.
1
Select the channel.
2
Adjust the frequency.
≥
Adjust the frequency by checking the signal strength
and signal quality displays.
3
Press [OK] to start scan.
The set channel is displayed in the table.
∫
Update Channel List
You can update channels to the latest one.
≥
This takes about 3 minutes.
“Finished” is displayed when the search is finished.
Press [RETURN
].
Digital TV Channel List
1
2
3
4
5
6
7
RETURN
Hide
Select
Swap
Reveal all
Tune
Channel names
Digital TV Manual Tuning
Physical Channel
No.
New
Channel Name
Type
0
10
0
10
[ ]
Signal Quality
Signal Strength
RETURN
Select offset
Select physical channel
Start tuning
MHz
Digital TV:0
Scan
CH 6
69
RF Ch
Digital TV:0
Searching
Quality
Type
Channel Name
RETURN
This will take about 3 minutes.
Digital TV Update Channel List
DMRXW385GL-VQT3F56_eng.book 68 ページ ２０１１年２月８日 火曜日 午後４時３８分
