Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
PLEASE
WAIT
Unit is in termination process
Unit is in termination process now.
“BYE” is displayed and power will be turned
off.
In case “Quick Start” of setup menu is ON, it
is displayed in restoration operation for AC
off.
No display
9.2. Special Modes Setting
Item
FL display
Key operation
Mode name
Description
Front Key
TEST Mode
*All the main unit´s parameters (include tuner)
are initialized.
Press
[STOP],
[CH
UP]
and
[OPEN/CLOSE]
keys
simultaneously
for five seconds
when power is off.
Rating password
The audiovisual level setting password is
initialized to “Level 8”.
Open the tray, and press [REC] and
[PLAY]
simultaneously
for
5
seconds.
NOTE:
Drive should be selected to DVD.
Service Mode
Setting every kind of modes for servicing.
*Details are described in “
9.3. Service
Mode
”.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is ON,
execute " Forced disc eject " after releasing
Timer REC or EXT-LINK.
*This command is not effective during "Child
lock" is ON.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
The
display
before
execution
leaves.
When the power is off, press
[STOP]
and
[CH
UP]
keys
simultaneously for 5 seconds.
Child lock/unlock
Set or release “Child Lock”.
Press [ENTER] and [RETURN] by
remote
controller
simultaneously
until [X-HOLD] is displayed.
NTSC/PAL system select To switch PAL/NTSC alternately.
The
display
before
execution
leaves.
While the power is on (E-E mode),
press [STOP] and [OPEN/CLOSE]
simultaneously for 5 seconds.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON or EXT-LINK is ON,
execute “Forced Power-off” after releasing
Timer REC or EXT-LINK.
Display in P-off mode.
Press [Power] key over than 10
seconds.
Aging
Perform sequence of modes as * Aging
Description shown below continually.
Display following the then mode.
When the power is ON, press
[STOP],
[POWER]
and
[OPEN/CLOSE] simultaneously for
over 5 seconds and less than 10
seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit’s parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-
execute this command.
*When releasing Aging mode, press
[POWER] key.
16
DMR-ES10EB / DMR-ES10EC / DMR-ES10EG / DMR-ES10EP / DMR-ES10EBL
Summary of Contents for DMR-ES10PL
