Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
HARD
ERR
Drive error
The drive detected a hard error.
“
DVD drive
error.” Display for 5 seconds.
SELF
CHECK
Restoration operation
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It
will
OK,
if
a
display
disappears
automatically. If a display does not disappear,
there is the possibility that defective Digital
P.C.B. / RAM drive.
No display
PLEASE
WAIT
Unit is in termination process
Unit is in termination process now.
“BYE” is displayed and power will be turned
off.
In case “Quick Start” of setup menu is ON, it
is displayed in restoration operation for AC
off.
No display
UNFORM
AT
Unformatted disc error
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
IR ERR
IR communication error
[IR ERR] is displayed when communication
between
Timer
microprocessor
and
IR
microprocessor fails.
No display
No REC
Recording is impossible
[No REC] is displayed when recording is
impossible due to the defect, dirt or wound of
media.
No display
HDD
ERROR
[HDD ERR] is displayed when
start up of HDD was failed.
(Except error of setting of
Power on Stand-by)
a) When normal start up was failed.
b) When start up at HDD boot was failed.
c) When start up from state of P-OFF was
failed.
d) When start up from state of HDD SLEEP
was failed.
[HDD ERR] is displayed when above each
start up of HDD was failed.
*In case b), tray opens automatically and
[HDDERR] is displayed until version up disc is
inserted.
No display
HDD NG
Power on Stand-by setting
error
[HDD NG] is displayed when power on Stand-
by setting of HDD is NG or when HDD which
power on Stand-by is not set to is used.
Please try to replace HDD with junine HDD as
service parts.
No display
8.1.2. Special Modes Setting
Item
FL display
Key operation
Mode name
Description
Front Key
TEST Mode
*All the main unit´s parameters (include tuner)
are initialized.
Press
[STOP],
[CH
UP]
and
[OPEN/CLOSE]
keys
simultaneously for five seconds
when power is off.
Rating password
The audiovisual level setting password is
initialized to “Level 8”.
Open the tray, and press [REC] and
[PLAY]
simultaneously
for
5
seconds.
Service Mode
Setting every kind of modes for servicing.
*Details are described in “
8.1.3. Service
Mode at a glance
”.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
22
DMR-EH65EE / DMR-EH65GC / DMR-EH65GCS / DMR-EH65GN
Summary of Contents for DMR-EH65EE
