42
RQT7301
Re
fe
re
n
c
e
Error messages
On the television
Page
On the unit’s display
Cannot finish recording
completely.
≥
The program was copy-protected.
≥
The disc may be full.
—
—
Cannot play.
≥
You inserted an incompatible disc (Discs recorded in PAL video etc.).
—
Cannot record on the disc.
≥
The disc may be dirty or scratched.
15
Unable to format.
Please check the disc.
Cannot record. Disc is full.
≥
Create space by erasing any unnecessary titles.
[RAM]
≥
Use a new disc.
[RAM]
[DVD-R]
24, 29, 33
—
Cannot record. Maximum
number of titles exceeded.
Error has occurred. Please
press ENTER.
≥
Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering
(“SELF CHECK” appears on the unit’s display).
—
No disc
≥
The disc may be upside down.
—
Please change the disc.
≥
There may be a problem with the disc. Press [
<
OPEN/CLOSE] to remove it and check it
for scratches or dirt. (The unit turns off automatically after you open the tray.)
15
This is a non-recordable disc.
≥
The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.
≥
You inserted an unformatted DVD-RAM. Format the disc with this unit.
—
33
This disc is not formatted
properly.
$
≥
The operation is prohibited by the unit or disc.
—
CHK REMOTE
(“
∑
” stands for a number.)
≥
The remote control and main unit are using different codes. Change the code on the
remote control.
Press and hold [ENTER] and the indicated number button at
the same time for more than 2 seconds.
14
HARD ERR
≥
If there is no change after turning the unit on and off, consult the dealer where the unit was
purchased.
—
NO READ
≥
The disc is dirty or badly scratched. The unit cannot record, play, or edit.
≥
You have used a DVD-RAM/PD lens cleaner and it has finished. Press [
<
OPEN/CLOSE]
to eject the disc.
15
—
PROG FULL
≥
There are already 16 timer programs. Delete unnecessary timer programs.
21
SELF CHECK
≥
There was a power failure or the AC plug was disconnected while the unit was on. The unit
is carrying out its recovery process. Wait until the message disappears.
—
UNSUPPORT
≥
You have inserted a disc the unit cannot play or record on.
15
U14
≥
The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan
on the rear of the unit.
—
U99
≥
The unit fails to operate properly. Press [POWER
Í
/I] on the main unit to switch the unit to
standby. Now press [POWER
Í
/I] on the main unit again to turn the unit on.
—
7301en.book 42 ページ ２００４年３月１日 月曜日 午後５時３５分
