Panasonic DMR-E50EB, Service Manual

Page: 4 / 196

Laser Power: No hazardous radiation is
emitted with the safety
protection
Notes:
Mass and dimensions shown are approximate.
Specifications are subject to change without notice.
Notes:
The part of DVD RAM Drive (VXY1772) is listed
separately.
Please refer to ORDER NO. RAM0301002C0.
1
1. SAFETY PRECAUTIONS
1.1. GENERAL GUIDELINES
1. When servicing, observe the original lead dress. If a short circuit is found, replace
all parts which have been overheated or damaged by the short circuit.
2. After servicing, see to it that all the protective devices such as insulation barriers,
insulation papers shields are properly installed.
3. After servicing, make the following leakage current checks to prevent the customer
from being exposed to shock hazards.
1.1.1. LEAKAGE CURRENT COLD CHECK
1. Unplug the AC cord and connect a jumper between the two prongs on the plug.
2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug
and each exposed metallic cabinet part on the equipment such as screwheads,
connectors, control shafts, etc. When the exposed metallic part has a return path to
thechassis, the reading should be between 1M and 5.2M .
When the exposed metal does not have a return path to the chassis, the reading
must be .