Gettin
g started
SQT1111
12
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [
Í
] on the remote control or [
Í
/I] on
this unit.
• The Easy Setting will start at the initial power on.
3
Select the country you live in, and press
[OK].
•
[For_Australia]
If you select “Australia”, the “Region Selection” will
appear. Select the region you live in, and press [OK].
•
[For_New_Zealand]
If you select “New Zealand”, a screen asking you to
restart this unit will appear. Press [OK] to restart it.
Wait until a screen appears again. After the screen
appears, Easy Setting resumes.
4
Follow the on-screen instructions and
perform the settings.
Auto Setup starts.
(This operation may take some time.)
e.g.,
[For_Australia]
5
Clock is set automatically.
If the clock setting screen appears, set the
time manually. (
>
66, Clock)
6
Set “Quick Start” to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
For details, refer to “Quick Start”. (
>
65)
7
Select the aspect ratio that matches the
connected TV.
For details, refer to “TV Aspect”. (
>
64)
When “Easy Setting has been completed.”
appears, Easy Setting is completed.
• Select “Yes” to set network settings.
• Select “No” to finish the Easy Setting.
To stop partway
Press [RETURN
].
To restart setup (
>
60, Auto Setup)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
After Easy Setting is completed, select “Yes”.
Easy Network Setting will start automatically.
When “Easy Network Setting is finished.” appears
Press [OK].
Easy Setting
Progress
Digital TV Auto Tuning
CH 6
69
RF Ch
Digital TV: 2
Searching
Quality
Type
Channel Name
This will take about 3 minutes.
35
10
10
35
Digital TV
Digital TV
Easy Network Setting
DMRBWT460GN_eng.book 12 ページ ２０１６年４月１４日 木曜日 午後１２時３分
