49
9.2.4.
Slide Cam
1. Perform the step "9.2.3. Pulley Gear, Belt".
2. Remove the Sheet.
3. Open the connector lock, and disconnect the 4 FFCs.
4. Remove 2 Screws (B) and the Drive P.C.B.
Caution:
Though the Drive P.C.B. is not supplied as replace-
ment parts, it must be removed for after disassem-
bling.
5. Open the connector lock, and disconnect the FFC.
6. Remove 2 Screws (C), and remove the Traverse Base
Ass’y with spreading the 2 hooks to the direction of
arrows.
7. Remove the Slide Cam.
9.2.5.
Mid Gear, Drive Gear and Loading
Motor
1. Perform the step "9.2.4. Slide Cam".
2. Remove the Mid Gear and Drive Gear.
3. Remove Screw (D) to remove the Loading Motor.
4. Remove Screw (E), and remove the SW P.C.B. with the
Loading Motor.
Remove the 2 soldering points, and remove the Loading
Motor.
Summary of Contents for DMR-BS785EG
