35
VQT2T11
Refe
re
n
c
e
The images from this unit do not appear on
the television.
Picture is distorted.
¾
An incorrect resolution is selected in “Component
Resolution” or “HDMI Video Format”. Reset the setting as
follows:
1
While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
– "00 RET” is displayed on the unit’s display.
2
Repeatedly press [
1
](right) on the remote control or [
Í
/I]
on the unit until “04 PRG” is displayed on the unit's
display.
3
Press and hold [OK] on the remote control or [
<
OPEN/
CLOSE] on the unit for at least 3 seconds.
Set the item again. (
>
32)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio
are not output in bitstream, select “Yes” in “Default Settings”
and make proper settings. (
>
33)
¾
The unit and television are using different video systems.
While stopped, keep pressing [
∫
] and [
<
OPEN/CLOSE]
on the main unit for 5 or more seconds. The system
switches from PAL to NTSC or vice versa.
¾
The system used on the disc doesn’t match your
television.
– PAL discs cannot be correctly viewed on an NTSC
television.
– This unit can convert NTSC signals to PAL60 for viewing
on a PAL television (“NTSC Contents Output” in the
“Picture”).
Video is not output
.
¾
Set the “High Clarity Sound” in the
Playback
menu to “Off”
to use the COMPONENT VIDEO OUT terminal or the
VIDEO OUT terminal. (
>
29)
¾
Video from the HDMI SUB AV OUT terminal is not output
when the “HDMI(SUB) Output Mode” is set to
“V.OFF(Video Off)”. (
>
32)
Video is not output in high-definition.
¾
Confirm that the “HDMI Video Mode”, “HDMI Video
Format”, and “Component Resolution” in the Setup menu
are set properly. (
>
32)
¾
The video output resolution is restricted to “576p/480p”
when DVD-Video discs, DivX and BD-Video discs
recorded at a rate of 50 field per second are output from
the COMPONENT VIDEO OUT terminals.
3D video is not output.
¾
Is there a non-3D compatible amplifier/receiver connected
between this unit and a TV? (
>
10
)
¾
If there is a non-3D compatible amplifier/receiver
connected to the HDMI SUB AV OUT terminal, set the
“HDMI(SUB) Output Mode” to “V.OFF(Video Off)”. (
>
10
)
¾
Are the settings on this unit and the TV correct? (
>
22
)
¾
Is the amplifier/receiver which is connected between this
unit and TV on?
3D video is not output correctly as 2D.
¾
Is the “Playback method for 3D disc” set to “2D
Playback”? (
>
30)
¾
Discs that have recorded titles with Side by side (2 screen
structure) which can be enjoyed in 3D are played back in
accordance with the settings of the TV.
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾
Confirm the “TV Aspect” is set properly. (
>
32)
¾
Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (
>
19) on the unit is
also possible.)
Cannot switch audio.
¾
When connecting an amplifier/receiver using a COAXIAL
/
OPTICAL terminal or an HDMI terminal, you cannot
switch the audio if “Digital Audio Output” is set to
“Bitstream”. Set “Digital Audio Output” to “PCM” or
connect using AUDIO OUT terminal. (
>
11, 31)
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio Output”
settings. (
>
31)
¾
When the unit is connected to an amplifier/receiver with
the AUDIO OUT terminal, set “Analog Audio Output”.
(
>
32)
¾
To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (
>
32)
¾
When connecting this unit to a TV via an HDMI MAIN AV
OUT and to an amplifier/receiver via an HDMI SUB AV
OUT, set “HDMI(SUB) Output Mode” to “V.OFF(Video
Off)”. (
>
10)
There is no sound coming out from the TV.
¾
Audio may not output from the TV when the amplifier/
receiver is connected to the HDMI SUB AV OUT, and
“HDMI(SUB) Output Mode” (
>
32) is set to “V.OFF(Video
Off)”. In such a case, output audio from the amplifier/
receiver. To output audio from the TV, set the “HDMI(SUB)
Output Mode” to “Normal”.
Picture
Audio
DMP-BDT300EG-VQT2T11 _eng.book 35 ページ ２０１０年３月３日 水曜日 午後６時３３分
